Water Rreatment Sand /Carbon filter/Water Softening Plant for RO
- Raw water storage tank
- Sand filter
- Active carbon filter
- Sodium-ion Filter
- Fine Filter
- RO System
- Ultraviolet Sterilizer
- Ozone Generator
- Pure Water Storage Tank
- Pipes,Fittings & Valves
Purified water is the most highly treated and closely regulated
bottled water product by the FDA and IBWA, but also offers the most
consistent and highest quality water to the consumer. It is noted
that consumers of bottled water prefer the taste of purified water
over other types. Bottlers say the consistent flavor is a result of
the purification process. There are three primary processes used to
produce purified water: deionization, distillation and reverse
osmosis. Most bottlers choose RO over the others because of the
many advantages, including reduced cost and increased performance.
Some of these advantages also include removing nearly all organic
compounds and up to 99% of ions and it rejects 99% of viruses,
bacteria and fever producing substances. Also, RO is more energy
Water from lakes, rivers or the ground passes through a screen as
it enters the water treatment plant. When the water source is a
lake or river, the screen serves an important function, keeping out
large natural contaminants such as plants and wood, or fish. If
ground water is used, screening may not be necessary since the
water has passed through layers of the earth in what is essentially
a natural screening function.
Treatment plant workers add alum and other chemicals to the water,
which cause tiny sticky particles, or floc, to form. These floc
attract dirt particles, making them eventually heavy enough to sink
to the bottom of the water storage tank.
The water and floc flow into a sedimentation basin. As the water
sits there, the heavy floc settle to the bottom, where they remain
Water passes through layers of gravel, sand and perhaps charcoal,
which serve to filter out any remaining particles. The gravel layer
is often about 1 foot deep and the sand layer about 2 feet deep.
Water goes into a closed tank or reservoir. Chlorine or other
disinfecting chemicals kill any remaining microorganisms or
bacteria in the water and help keep the water clean until
distribution. If a water treatment facility uses ground water as
its only water source, disinfection may be the only step required
to sufficiently treat the water. After it is disinfected, the
purified water sits in the closed tank or reservoir until it flows
through pipes to homes and businesses.
1. Water tank: storage of tap water, to solve the problem of insufficient tap
water pressure and the back booster pump due to the impact of
insufficient water, reduce the failure rate
2. Booster pump: equipped with a stainless steel pump, to provide sufficient
pressure for subsequent filtration
3. Quartz sand filter: mainly remove the mud, suspended solids and large particles in
the tap water
4. Carbon filter: mainly remove organic substances, residual chlorine and odor in
5. Water softener filter: mainly remove the calcium and magnesium in tap water, reduce the
hardness of water
6. Security filter: further filtration, protection of reverse osmosis membrane
7. High pressure pump: provide enough pressure for reverse osmosis system
8. Reverse osmosis unit: the core part of pure water equipment, the production of
9. Pure water tank: storage pure water, can change the size of the water tank,after
the below process,The water result is pure enough for different
|Raw Water Storage Tank||3000L/H|
Storage tanks for water,thickness 2mm,single layer
Filters:Silica Sand Filter,Active Carbon Filter,Sodium-ion
Filter,SS Pipes,Fittings And Valves.Pressure Gauge Material:SS304,
500*1500 With Filting Material 440/120/180Kg
High Pressure Nanfang Pump,
Electricity Control Box,Conductivity Meter,Flowmeter,Pressure Gauge
|Active Carbon Filter||3000L/H|
Sterilizing rate: 99.9%
Water capacitty: 1--100
Working pressure: 0.2--0.6Mpa
Water tem: 25℃
Usage hour: 8000H
|Ozone Generator With Mixer Tower||5G/H|
|Pure Water Storage Tank||2000L/H|
Storage tanks for water,
Pump lift: 16H(M)
Max.Rotation Rate: 1750r/min
|Pipes,Fittings & Valves||SUS304|
1. The water must be pretreated before entering into the RO system,
or it will bring damage to the RO membrane.
2. The RO system not only can be used for desalination, but also
for filtering the organic substance and bacteria.
3. The production of water is monitored by the liquid crystal
display conductivity meter.
4. The RO system needs be cleaned timely, including the stainless
steel pump, filter, disinfectant tank, valve and other components.
5. Commonly, the RO system should work once every day. If it does
not work in one week, it must be protected by some measures, or the
service life of the membrane will be serious affected.
Q: Are you a factory or trading company?
A:HQ Machinery is a factory who has rich experiences in All kinds
of bottle blow moulding machine, we offer OEM services in the last
over 20 years, and now we have our own brands and own designed machines for
Q: How long need to ship the machines after order
A: All machines can be ready and shipped in 20-60 days after order!
Q: What's the payment you prefer?
A: Our standard payment terms are T/T with 30% deposits and
balanced before shipment.